Rohde & Schwarz SMR20 - Page 44

Sample Setting for First Users R&S SMR
1134.9108.12 E-1 2.4
Setting the step width
Subsequently to the above setting, 4.2 GHz as new RF frequency and 12 kHz as the step width for the
RF frequency variation are set in the following.
Operating steps Explanations
B
ACK
BACK
BACK
Reset the menu cursor to the main
menu in 3 steps.
.
Frequency
.
M
ENU / VARIATION
SELECT
MENU / VARIATION
Select menu Frequency using rotary
knob.
Press [SELECT] key or rotary knob.
The frequency setting menu is
displayed.
.
Frequency
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select parameter Frequency.
Press [SELECT] key or rotary knob.
The menu cursor marks the setting
value.
.24
G
n
DATA INPUT
[dBµV]
Enter frequency 4.2 GHz.
Press [SELECT] key or rotary knob.
The menu cursor is set back to
Frequency.
BACK
Press [BACK] key. The menu cursor
is set back to Frequency.
.
Knob Step User
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select parameter Knob Step User
using rotary knob.
Press [SELECT] key or rotary knob.
2
1
k
m
DATA INPUT
mV
Enter step width 12 kHz.
BACK
Press [BACK] key. The menu cursor
is set back to Knob Step User.