Basic Operating Steps R&S SMR
1134.9108.62 E-1 3.6
Correction of Input
Digits can be corrected by one of the following keys before the input is confirmed by the [Enter] key:
Key [-/
]
The backspace key deletes the value entered digit by digit. When the last
digit is deleted, the previous value is displayed.
[
BACK] key
Pressing the [BACK] key deletes the entire entry and results in the previous
value being indicated again.
For a subsequent new input in the setting menu, the menu cursor is to be set
to the setting value again using the [SELECT] key.
For a subsequent new input via the [FREQ] or [LEVEL] keys, the respective
key has to be pressed again.
[FREQ]/[LEVEL] keys
In the case of a frequency or level input by means of the [FREQ] or [LEVEL]
keys, pressing the [FREQ] and/or [LEVEL] key again deletes the entire input.
To Next Page
Loading...
