R&S SMR List Editor
1134.9108.62 E-1 3.7
List Editor
The SMR offers the facility of generating lists for automatic sequences (list mode, memory sequence) or
for user-defined level correction (Ucor). The lists consist of elements (pairs of values) which are defined by
an index and at least one parameter per index. Each list is assigned a separate name and selected by
means of this name. Access to the lists is made in the associated menus. For example, sequences of
frequency and level value pairs can be accessed in the List menu. How to generate and edit lists is
explained in detail in this section by the example of the List mode (List menu, see Fig. 3-3).
Menu selection: List
Fig. 3-3 List menu
The settings for Mode, Reset List, Current Index etc are not relevant for the general description of the
list editor. They are described in greater detail in chapter 4 in section "List Mode".
The Select List, Delete List and Edit List lines are always displayed. They are intended for the selection
and deletion of lists and for the calling of editing functions.
Select List
Opens a window in which a list out of 10 lists can be selected. In this line, the
currently active list is displayed (see section "Select List").
Delete List
Opens a window from which a list can be selected whose contents are to be
deleted (see section "Delete List").
Edit List
Selection of editing functions for list editing. When this item is selected, a pop-up
menu with the following editing functions opens (see section "Edit List"):
Insert Insertion of elements into a list
Fill Filling of a list with elements
Edit/View Editing of individual elements of a list
Delete Deletion of elements of a list
To Next Page
Loading...
