Manual Operation
R&S
®
SMU200A
114Operating Manual 1007.9845.32 ─ 15
●
Lists
Lists, e.g. user correction lists, can be loaded. They can be generated either exter-
nally or internally. For internal generation, a new list must be created in the "File
Select" dialog which will then be edited in the list editor of the individual menu.
●
Complex modulation and control data
User data of this type can be loaded. It can be generated either externally or internally.
For internal generation, a new list must be created which will then be edited in the
data and control list editor. These functions are offered in the "Data List Manage-
ment" dialog of the individual modulation menu.
●
Waveforms
Waveforms are generated externally (e.g. by means of the R&S WinIQSIM2 program
that is supplied together with the optional Baseband Generator R&S SMU-B10) and
can be loaded in the "Arbitrary Waveform Generation" dialog.
Softkeys are assigned to some of the functions and can be used for convinient operation.
For more information, refer to:
●
chapter 4.8, "Legend of Front-Panel Controls", on page 119 for an overview of key
functions and a cross-reference between the front panel keys and the keyboard
shortcuts
●
to section "Instrument Functions" for a detailed description of key functions.
Accessing files with user data
1. To access an editable user data file, select the "Save/Recall" or "File Manger" function
in the individual dialog.
2. To access a loadable user data file, select the "Select/New" or "File Manger" function
in the individual dialog.
3. To access the "File Manager" function, press the SETUP (CTRL+E) key and select
"Save/Recall > File Manager".
A "File Select" window for loading, saving or creating a file or the "File Manager"
dialog for managing all files is displayed.
File Management
To Next Page
Loading...
