Instrument Function
R&S
®
SMU200A
153Operating Manual 1007.9845.32 ─ 15
"Paper Size"
Selects the size of the printer paper for the hardcopy. The currently
selectable paper formats are "Letter", "Legal", "Executive", "A4" and
"A5". For information on the paper format width and height values are
indicated additionally. Depending on the set physical unit by the param-
eter "Unit", width and height are expressed in cm or inches.
SCPI command:
:HCOPy:PRINter:PAGE:SIZE on page 540
"Margins"
Defines the margins of the paper size for printing the hardcopy. "Top",
"bottom", "left" and "right" margin values have to be entered in this
sequence, separated by commas. Decimal places are separated by a
decimal point. Depending on the set physical unit by the parameter
"Unit", width and height are expressed in cm or inches.
SCPI command:
:HCOPy:PRINter:PAGE:MARGins on page 539
File Options
Dialog for setting the file parameters.
"Size"
Defines the size of the bitmap in terms of pixels. The first value of the
size setting defines the width, the second value the height of the image.
SCPI command:
:HCOPy:IMAGe:SIZE on page 539
"Format"
Selects the image format. Several bitmap formats are available.
SCPI command:
:HCOPy:DEVice:LANGuage on page 533
"Automatic
Naming"
Determines the rules to create the file names and sets the directory the
files are saved into.
As default the automatically generated file name is composed of:
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>
Each component can be deactivated/activated separately to individually
design the file name. The resulting file name is indicated.
"Path..."
Automatic naming only
Opens the "Select Hard Copy Destination Path" dialog to select a path
for storing the hardcopy.
Note: For selecting the destination path a file name must be entered as
well. Otherwise the error message "The name of a list may not be empty"
is displayed and the selection will be canceled.
Directory, path and file name are displayed in the infoline right to the
"Path" button.
SCPI command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory on page 535
:HCOPy:FILE[:NAME]:AUTO on page 534
General Instrument Settings
To Next Page
Loading...
