1141.2005.02 –s1- CE E-11
EC Certificate of Conformity
Certificate No.: 2003-47, Page 1
This is to certify that:
Equipment type Stock No. Designation
SMU200A 1141.2005.02 Vector Signal Generator
SMU-B9 1161.0766.02 Baseband Generator
SMU-B10 1141.7007.02 Baseband Generator
SMU-B11 1159.8411.02 Baseband Generator
SMU-B13 1141.8003.02/.04 Baseband Main Modul
SMU-B14 1160.1800.02 Fading Simulator
SMU-B15 1160.2288.02 Fading Simulator Extension
SMU-B16 1161.0066.02 Differential I/Q Outputs
SMU-B17 1142.2880.02 Analog Baseband Input
SMU-B20 1142.0006.02 FM/PHIM Modulator
SMU-B22 1160.5006.02 FM/PHIM Modulator a. enh. Phase Noise Performance
SMU-B30 1159.7444.02 Obervoltage Protection for 1st HF-Pfad
complies with the provisions of the Directive of the Council of the European Union on the
approximation of the laws of the Member States
- relating to electrical equipment for use within defined voltage limits
(2006/95/EC)
- relating to electromagnetic compatibility
(2004/108/EC)
Conformity is proven by compliance with the following standards:
EN61010-1 : 2001-12
EN55011 : 1998 + A1 : 1999 + A2 : 2002, Class B
EN61326 : 1997 + A1 : 1998 + A2 : 2001 + A3 : 2003
For the assessment of electromagnetic compatibility, the limits of radio interference for Class B
equipment as well as the immunity to interference for operation in industry have been used as a basis.
Affixing the EC conformity mark as from 2003
ROHDE & SCHWARZ GmbH & Co. KG
Mühldorfstr. 15, D-81671 München
Munich, 2008-11-28 Central Quality Management MF-QZ / Radde
To Next Page
Loading...
