1141.2005.02 –s2- CE E-11
EC Certificate of Conformity
Certificate No.: 2003-47, Page 2
This is to certify that:
Equipment type Stock No. Designation
SMU-B31 1159.8011.02/.04 High Power Output for 1st RF Path
SMU-B32 1160.0256.02 Overvoltage Protection and high Power for 1st HF-Pfad
SMU-B35 1160.0633.02 Overvoltage Protection for 2nd HF-Pfad
SMU-B36 1160.1000.02/.04 High Power Output for 2nd RF Path
SMU-B37 1160.1400.02 Overvoltage Protection and high Power for 2nd HF-Pfad
SMU-B81 1159.9001.02 Rear Panel Connectors
SMU-B82 1159.9501.02 Rear Panel Connectors
SMU-B90 1409.8604.02 Phase Coherence
SMU-B102 1141.8503.02 Freq. Range to 2,2 GHz for 1st RF Path
SMU-B103 1141.8603.02 Freq. Range to 3 GHz for 1st RF Path
SMU-B104 1141.8703.02 Freq. Range to 4 GHz for 1st RF Path
SMU-B106 1141.8803.02 Freq. Range to 6 GHz for 1st RF Path
SMU-B202 1141.9400.02 Freq. Range to 2,2 GHz for 2nd RF Path
SMU-B203 1141.9500.02/.15 Freq. Range to 3 GHz for 2nd RF Path
complies with the provisions of the Directive of the Council of the European Union on the
approximation of the laws of the Member States
- relating to electrical equipment for use within defined voltage limits
(2006/95/EC)
- relating to electromagnetic compatibility
(2004/108/EC)
Conformity is proven by compliance with the following standards:
EN61010-1 : 2001-12
EN55011 : 1998 + A1 : 1999 + A2 : 2002, Class B
EN61326 : 1997 + A1 : 1998 + A2 : 2001 + A3 : 2003
For the assessment of electromagnetic compatibility, the limits of radio interference for Class B
equipment as well as the immunity to interference for operation in industry have been used as a basis.
Affixing the EC conformity mark as from 2003
ROHDE & SCHWARZ GmbH & Co. KG
Mühldorfstr. 15, D-81671 München
Munich, 2008-11-28 Central Quality Management MF-QZ / Radde
To Next Page
Loading...
