Rohde & Schwarz SMU200A - Page 24

Contents
R&S
®
SMU200A
4Operating Manual 1007.9845.32 ─ 15
2.6.1 Connecting the Instrument to the Network....................................................................43
2.6.2 Assigning the IP Address..............................................................................................44
2.6.3 Using computer names.................................................................................................45
2.6.4 Changing the Windows Firewall Settings......................................................................45
2.6.5 Working with Directories...............................................................................................46
2.7 Remote Access via an External Controller...............................................................46
2.7.1 Using a Web Browser for Remote Access....................................................................48
2.7.2 Remote Desktop Connection........................................................................................49
2.7.3 Remote Access via Ultr@VNC......................................................................................51
2.8 Using Virus-Protection Software...............................................................................57
2.9 LXI Configuration........................................................................................................58
2.9.1 LXI Browser Interface....................................................................................................60
2.9.2 LAN Configuration.........................................................................................................61
2.9.2.1 Advanced LAN Configuration........................................................................................62
2.9.2.2 Ping...............................................................................................................................63
3 Getting Started.....................................................................................65
3.1 Brief Introduction to the Instrument's Concept.......................................................65
3.2 Applications of the Instrument..................................................................................67
3.2.1 Generation of digitally modulated signal.......................................................................67
3.2.2 Two Baseband Generators, One RF Path....................................................................69
3.2.3 One Baseband Path and Two RF Paths.......................................................................70
3.2.4 Fully Equipped Two-Path Instrument............................................................................71
3.3 Baseband Section.......................................................................................................71
3.3.1 Description of Individual Diagram Blocks of the Baseband Section..............................73
3.4 RF Section...................................................................................................................75
3.4.1 Description of Individual Diagram Blocks of the RF Section.........................................75
3.5 Example of Setup........................................................................................................77
4 Manual Operation.................................................................................85
4.1 Key Features................................................................................................................85
4.2 Display.........................................................................................................................89
4.2.1 Settings Displayed in the Header Section.....................................................................90
4.2.2 Status Information and Messages.................................................................................91
4.2.2.1 Status Information.........................................................................................................91