Instrument Function
R&S
®
SMU200A
273Operating Manual 1007.9845.32 ─ 15
Import/Export
Lists can be imported from externally created files or exported into text or CSV-files. The
import/export settings are available after clicking the "Import/Export" button.
Import/Export - List Mode
Expands the menu with the area for import and export of list mode files.
Externally edited Excel tables with frequency/level pairs can be imported as text or CSV-
files and used for list mode.
On the other hand, internally created list mode list can be exported as text or CSV-files.
Mode - List Mode
Selects if list mode lists should be imported or exported. The settings offered below
depend on the selected mode.
SCPI command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 752
Extension - List Mode
Selects the file extension of the ASCII file to be imported or exported. Selection TXT (text
file) or CSV (Excel file) is available.
SCPI command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension on page 750
Decimal Point - List Mode
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
SCPI command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal on page 752
Column Separator- List Mode
Selects the separator between the frequency and level column of the ASCII table.
SCPI command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn on page 751
RF Signal and Analog Modulations - RF Block
To Next Page
Loading...
