Rohde & Schwarz SMU200A - I;Q Modulation - I;Q Mod Block

Instrument Function
R&S
®
SMU200A
275Operating Manual 1007.9845.32 ─ 15
From
Sets the start value of the index range.
SCPI command:
n.a.
Range
Sets the range for filling the table.
SCPI command:
n.a.
Select column to fill
Selects either the frequency or the level column to be filled with the value defined below.
SCPI command:
n.a.
Start value
Sets the start value for the frequency or the level entries.
SCPI command:
n.a.
End value
Sets the end value for the frequency or the level entries.
SCPI command:
n.a.
With increment
Sets the increment for the frequency or the level entries.
SCPI command:
n.a.
Fill
Fills the selected column in the set range with values, starting with the start value and
using the set increment.
SCPI command:
n.a.
5.6 I/Q Modulation - I/Q Mod Block
The R&S Signal Generator offers I/Q modulation with:
●
external analog I/Q signals,
●
external digital signals,
●
internal digital signals.
I/Q Modulation - I/Q Mod Block