Instrument Function
R&S
®
SMU200A
323Operating Manual 1007.9845.32 ─ 15
The complex I/Q bandwidth of the shifted useful signal must not exceed 80 MHz in total.
The following applies:
f
offset
- f
use
/2 >= - 80MHz/2 and f
offset
+ f
use
/2 <= + 80MHz/2
f
use
= the complex useful bandwidth of the I/Q signal before the offset.
f
offset
= frequency offset.
The following graph illustrates the setting range for the frequency offset.
Fig. 5-24: Setting range for frequency offset
Baseband Signal - Baseband Block
To Next Page
Loading...
