Instrument Function
R&S
®
SMU200A
356Operating Manual 1007.9845.32 ─ 15
In case of selection "Variable FSK", the FSK type and the deviation for each symbols is
set in the "Variable FSK" section.
FSK Type - Digital Modulation
(Variable FSK only)
Selects the FSK modulation type for selection "Variable FSK".
You may choose from 4FSK, 8FSK and 16FSK.
SCPI command:
[:SOURce<hw>]:BB:DM:FSK:VARiable:TYPE on page 641
Deviation xxxx - Digital Modulation
(Variable FSK only)
Set the deviation of the associated symbol. The number of symbols depends on the
selected modulation type. The value of each symbol is indicated in binary format.
SCPI command:
[:SOURce<hw>]:BB:DM:FSK:VARiable:SYMBol<ch>:DEViation on page 641
Modulation Delay - Digital Modulation
(Data Source ext serial and ext parallel only)
Displays the digital modulation delay from the data input to the I/Q output.
The value is displayed only if an external synchronous data source is selected. In this
case the value represents the delay between the active clock edge for data and the cor-
responding peak I/Q value (associated with this data item) on the I/Q connectors.
SCPI command:
[:SOURce<hw>]:BB:DM:MDELay on page 642
Current Modulation Type - Digital Modulation
Displays the currently selected modulation type together with its associated mapping.
SCPI command:
n.a.
Baseband Signal - Baseband Block
To Next Page
Loading...
