Instrument Function
R&S
®
SMU200A
447Operating Manual 1007.9845.32 ─ 15
"Route to path
B"
The external baseband signal is fed into path B. If an internal signal from
pathB is generated at the same time, the two signals are summed.
"Route to path A
and B"
The external baseband signal is fed into path A and path B. If internal
signals from one or two paths are generated at the same time, all signals
in each path are summed.
SCPI command:
[:SOURce]:BBIN:ROUTe on page 695
External Baseband Signal - Baseband Input
To Next Page
Loading...
