Rohde & Schwarz SMU200A - Mmemory:dcatalog:length; Mmemory:load:state

Remote Control Commands
R&S
®
SMU200A
549Operating Manual 1007.9845.32 ─ 15
:MMEMory:DCATalog:LENGth? [<path_name>]
Returns the number of subdirectories in the current or specified directory.
Return values:
Number of parent and subdirectories.
Query parameters:
String parameter to specify the directory. If the directory is omitted,
the command queries the contents of the current directory, to be
queried with MMEM:CDIR command.
<file_entry_count>
<path_name>
MMEM:DCAT:LENG?
reads out the number of subdirectories in the current directory.
Response: 3
there are 3 subdirectories in the current directory.
Example:
:MMEMory:DELete <Delete>
Removes a file from the specified directory.
Setting parameters:
<file_name>
String parameter to specify the name and directry of the file to be
removed.
<Delete>
MMEM:DEL 'D:/USER/TEST1.SAVRCL'
deletes the file 'Test1.savrcl' in the USER directory.
Example:
Event
SCPI conform
Usage:
:MMEMory:LOAD:STATe <sav_rcl_state_number>, <file_name>
This command loads the specified file stored under the specified name in an internal
memory.
After the file has been loaded, the instrument setting must be activated using an *RCL
command.
Setting parameters:
<numeric_value>
Determines to the specific <number> to be used with the *RCL
command, e.g. *RCL 4.
<string>
String parameter to specify the file name with extension
*.savrcl.
<sav_rcl_state_numb
er>
<file_name>
MMEMory Subsystem