Rohde & Schwarz SMU200A - Source:bb:arb:wav Subsystem

Remote Control Commands
R&S
®
SMU200A
610Operating Manual 1007.9845.32 ─ 15
Parameters:
LONG|SHORt|USER
LONG
The resulting signal period is defined by the longest I/Q file in the
carrier table. Shorter I/Q files are periodically repeated.
SHORt
The resulting signal period is defined by the shortest I/Q file in the
carrier table. Only the first part of longer I/Q files is used.
USER
The signal period can be set with command
SOUR:BB:ARB:MCARr:TIME. Shorter I/Q files are repeated
periodically, and only the first part of longer I/Q files is used.
LONG
<Mode>
*RST:
BB:ARB:MCAR:TIME:MODE LONG
selects signal period mode long
Example:
SOURce:BB:ARB:WAV Subsystem
The WAVeform subsystem contains the commands for working with waveform files.
[:SOURce<hw>]:BB:ARB:WAVeform:CATalog..................................................................610
[:SOURce<hw>]:BB:ARB:WAVeform:CATalog:LENGth......................................................611
[:SOURce<hw>]:BB:ARB:WAVeform:DATA......................................................................611
[:SOURce<hw>]:BB:ARB:WAVeform:DELete....................................................................612
[:SOURce<hw>]:BB:ARB:WAVeform:FREE......................................................................612
[:SOURce<hw>]:BB:ARB:WAVeform:HDDStreaming:BLEVel.............................................613
[:SOURce<hw>]:BB:ARB:WAVeform:HDDStreaming:STATe..............................................613
[:SOURce<hw>]:BB:ARB:WAVeform:POINts....................................................................613
[:SOURce<hw>]:BB:ARB:WAVeform:SELect....................................................................614
[:SOURce<hw>]:BB:ARB:WAVeform:TAG........................................................................614
[:SOURce<hw>]:BB:ARB:WAVeform:CATalog?
This command reads out the files in the default directory. The default directory is set using
command MMEM:CDIRectory. When the names of the waveform files are returned they
are separated by commas. Only files with the file extension *.wv will be listed.
Return values:
string<Catalog>
MMEM:CDIR 'D:/user/waveform'
sets the default directory to D:/user/waveform.
BB:ARB:WAV:CAT?
reads out all the files in the default directory.
Response: sin1, wave
the directory contains the waveform files sin1.wv and
wave.wv.
Example:
Query onlyUsage:
SOURce Subsystem