Rohde & Schwarz SMU200A - Page 722

Remote Control Commands
R&S
®
SMU200A
702Operating Manual 1007.9845.32 ─ 15
[:SOURce<hw>]:CORRection:CSET:DATA[:SENSor<ch>][:POWer]:SONCe
The command activates the filling of the user correction list with level values acquired by
the power sensor.
The command activates the filling of the user correction list with level values acquired by
the selected power sensor. All level correction values for the given frequency values are
entered in the selected list. The power sensor used is selected by the suffix in key word
SENSe of the command header.
Suffix:
1 .. 3
Suffix 1 denotes the sensor connected to the SENSOR connector,
suffix 2 the sensor connected first to one of the USB interfaces
and suffix 3 the sensor connected second to one of the USB inter-
faces.
<ch>
CORR:CSET:DATA:SENS:POW:SONC
fills the user correction list with level values acquired by the power
sensor connector to the SENSOR connector.
Example:
EventUsage:
[:SOURce]:CORRection:CSET:DELete <Delete>
The command deletes the specified table.
The lists are stored with the fixed file extensions *.uco in a directory of the user's choice.
The directory applicable to the commands is defined with the command
MMEMory:CDIR. A path can also be specified in command :SOUR:CORR:CSET:CAT?,
in which case the file in the specified directory is deleted.
The numerical suffix under SOURce is irrelevant.
Setting parameters:
<table name><Delete>
MMEM:CDIR 'D:/Lists/ucor'
selects the directory for the user correction files.
CORR:CSET:DEL 'UCOR1'
deletes the table ucor1.
Example:
EventUsage:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog?
The command requests a list of available ASCII files for export/import of user correction
data. The individual files are separated by commas.
The ASCII files are stored with the fixed file extensions *.txt or *.csv in a directory of
the user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR.
SOURce Subsystem