Remote Control Commands
R&S
®
SMU200A
753Operating Manual 1007.9845.32 ─ 15
Parameters:
IMPort|EXPort
IMPort
<Mode>
*RST:
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL 'D:
/user/listmode/import/list.csv'
selects that ASCII file list.csv is imported.
LIST:DEXC:SEL 'rootD:
/user/listmode/import/list_imp'
selects that the ASCII file list.csv is imported into list mode list
list_imp.
Example:
[:SOURce<hw>]:LIST:DEXChange:SELect <Select>
The command selects the list mode list to be imported or exported.
The list mode files are stored with the fixed file extensions *.lsw in a directory of the
user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR. A path can also be specified in command SOUR:LIST:DEXC:SEL, in
which case the files are stored or loaded in the specified directory.
Parameters:
<list_name><Select>
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL ‘D:
/user/listmode/import/list.csv'
selects that ASCII file list.csv is imported.
LIST:DEXC:SEL ‘D:
/user/listmode/import/list_imp'
selects that the ASCII file list.csv is imported into list mode list
list_imp.
Example:
[:SOURce<hw>]:LIST:DWELl <Dwell>
The command sets the time for which the instrument retains a setting.
Parameters:
float
1 ms to 1 s
10 ms
<Dwell>
Range:
*RST:
LIST:DWEL 15
each setting in the list is retained for 15 ms.
Example:
SOURce Subsystem
To Next Page
Loading...
