Preparing for Use
R&S
®
SMU200A
62Operating Manual 1007.9845.32 ─ 15
The "TCP/IP Mode" configuration field controls how the IP address for the instrument
gets assigned (see also chapter 2.6.2, "Assigning the IP Address", on page 44). For the
manual configuration mode, the static IP address, subnet mask, and default gateway are
used to configure the LAN. The automatic configuration mode uses DHCP server or
Dynamic Link Local Addressing (Automatic IP) to obtain the instrument IP address.
Changing the LAN configuration is password-protected. The password is LxiWebIfc
(notice upper and lower case characters). This password cannot be changed in the cur-
rent firmware version.
The links at the bottom of the "LAN Configuration" page open other pages:
●
"Ping Client" provides the ping utility to verify the connection between the instrument
and other devices.
●
"Advanced LAN Configuration" provides LAN settings that are not declared manda-
tory by the LXI standard.
2.9.2.1 Advanced LAN Configuration
The "Advanced LAN Configuration" menu provides LAN settings that are not declared
mandatory by the LXI standard.
LXI Configuration
To Next Page
Loading...
