Rohde & Schwarz SMU200A - Page 834

Remote Control Commands
R&S
®
SMU200A
814Operating Manual 1007.9845.32 ─ 15
R&S SMIQ Command Short description R&S
SMU
Remarks
[SOURce[1]:]GSM:FLISt:...
SOURceFilter lists -
[SOURce[1]:]GSM:FORMat
SOURceModulation type X
[SOURce[1]:]GSM:FSK:
DEViation
SOURceFSK modulation devi-
ation
X
[SOURce[1]:]GSM:PRAMp:
DELay
SOURceRamp envelope offset X
[SOURce[1]:]GSM:PRAMp:
FOFFset
SOURceOffset in the falling
edge
X
[SOURce[1]:]GSM:PRAMp:
PRESet
Preset PRAMp -
[SOURce[1]:]GSM:PRAMp:
ROFFset
Offset in the rising edge X
[SOURce[1]:]GSM:PRAMp:
SHAPe
Edge shape X
[SOURce[1]:]GSM:PRAMp:TIME
Edge slope X
[SOURce[1]:]GSM:SEQuence
Trigger mode X
[SOURce[1]:]GSM:SLOT:
ATTenuation
Level attenuation -
[SOURce[1]:]GSM:
SLOT<0|[1]..7>:LEVel
Power control level X
[SOURce[1]:]GSM:
SLOT<0|[1]..7>:SF
Stealing Flag X
[SOURce[1]:]GSM:
SLOT<0|[1]..7>:TSC:SELect
Training sequence X
[SOURce[1]:]GSM:
SLOT<0|[1]..7>:TSC:USER
Training's sequence X
[SOURce[1]:]GSM:
SLOT<0|[1]..7>:TYPE
Burst type X
[SOURce[1]:]GSM:
SLOT<0|[1]..7>[:SOURce]:
DATA
Data source X
[SOURce[1]:]GSM:
SLOT<0|[1]..7>[:SOURce]:
DATA:DLISt
Selection of data list X
[SOURce[1]:]GSM:SLOT<n>:
HOPPing:TRIGger
Trigger for hopping (LIST
Mode)
-
[SOURce[1]:]GSM:SLOT<n>:
PRESet
Preset slot -
[SOURce[1]:]GSM:SRATe
Symbol clock X
[SOURce[1]:]GSM:STANdard
Preset -
[SOURce[1]:]GSM:STATe
GSM on/off X
Alphabetical List of R&S SMIQ Commands