Rohde & Schwarz SMW-K144 - CORESET Settings; General Settings

5G New Radio Configuration and Settings
R&S
®
SMW-K144
100User Manual 1178.8013.02 ─ 06
Remote command:
"Mapping Coordinates = Cartesian":
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:APMap:COL<s2us0>:ROW<s3us0>:REAL
on page 229
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:APMap:COL<s2us0>:ROW<s3us0>:IMAGinary
on page 229
"Mapping Coordinates = Cylindrical":
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:APMap:COL<s2us0>:ROW<s3us0>:MAGNitude
on page 230
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:APMap:COL<s2us0>:ROW<s3us0>:PHASe
on page 230
5.6 CORESET Settings
Access:
1. Select "5G New Radio > General > Link Direction > Downlink".
2. Select "5G New Radio > Scheduling".
3. Select "User x BWP x > Content > CORESET".
4. Select "CORESET > Settings > Config".
CORESET
The CORESET settings are defined per user and per BWP. The CORESET size in the
frequency domain is given by number of resource blocks N
RB
COREST
is spans; in the
time - it can occupy 1, 2 or 3 symbols.
A CCE consists of 6 resource-element groups (REGs). The mapping between the CEE
and the REGs is unique per CORESET. It can be interleaved or non-interleaved and is
described by the so called REG bundles with different sizes (L).
Settings:
● General Settings................................................................................................... 100
● Payload Settings................................................................................................... 104
5.6.1 General Settings
Access:
1. Select "5G New Radio > General > Link Direction > Downlink".
CORESET Settings