Rohde & Schwarz SMW-K144 - Page 113

5G New Radio Configuration and Settings
R&S
®
SMW-K144
113User Manual 1178.8013.02 ─ 06
DCI format 1_0 is scrambled by C-RNTI or CS-RNTI and carries the following informa-
tion:
DCI field Remote command: Remark
Frequency Domain Resource
Assignment
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:FRDRes
on page 240
Time Domain Resource Assign-
ment
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TIDRes
on page 240
VRB-to-PRB Mapping [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:VTPRb on page 242
Modulation and Coding Scheme
(TB1)
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TB1:MCS
on page 241
New Data Indicator (TB1) [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TB1:NDI
on page 241
Redundancy Version (TB1) [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TB1:RV
on page 241
HARQ Process Number [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:HAPRoc
on page 242
(1st) Downlink Assignment
Index
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:DAI1 on page 243
TPC Command for Scheduling
PUCCH
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:TPUCch
on page 245
PUCCH Resource Indicator [:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:PUCResind
on page 245
PDSCH-to-HARQ Feedback
Timing Indicator
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:
SUBF<st0>:USER<dir0>:BWPart<gr0>:
ALLoc<user0>:CS:DCI<s2us0>:PDSHarq
on page 245
DCI Format 1_1 ← DCI Content Configuration
The DCI format 1_1 is used for scheduling of PDSCH in one DL cell.
CORESET Settings