Rohde & Schwarz SMW-K144 - Page 164

Remote-Control Commands
R&S
®
SMW-K144
164User Manual 1178.8013.02 ─ 06
[:SOURce<hw>]:BB:NR5G:SETTing:TMODel:UL:CATalog?................................................165
[:SOURce<hw>]:BB:NR5G:SETTing:TMODel:DL:CATalog?................................................165
[:SOURce<hw>]:BB:NR5G:STATe....................................................................................166
[:SOURce<hw>]:BB:NR5G:WAVeform:CREate................................................................. 166
[:SOURce]:BB:NR5G:VERSion?......................................................................................166
[:SOURce<hw>]:BB:NR5G:PRESet
Sets the parameters of the digital standard to their default values (*RST values speci-
fied for the commands).
Not affected is the state set with the command SOURce<hw>:BB:NR5G:STATe.
Example:
See Example "Storing current configuration" on page 147.
Usage: Event
Manual operation: See "Set to Default" on page 23
[:SOURce<hw>]:BB:NR5G:LINK <LinkDir>
Selects the transmission direction.
Parameters:
<LinkDir> DOWN | UP
*RST: DOWN
Example: See Example "Loading predefined test signals" on page 148.
Manual operation: See "Link Direction" on page 24
[:SOURce<hw>]:BB:NR5G:SETTing:CATalog?
Queries the files with settings in the default directory. Listed are files with the file exten-
sion *.nr5g.
Return values:
<FileNames> <filename1>,<filename2>,...
Returns a string of filenames separated by commas.
Example: See Example "Storing current configuration" on page 147.
Usage: Query only
Manual operation: See "Save/Recall" on page 23
[:SOURce<hw>]:BB:NR5G:SETTing:STORe <Filename>
Saves the current settings into the selected file; the file extension (*.nr5g) is
assigned automatically.
Parameters:
<Filename> "<filename>"
Filename or complete file path
General Commands