Remote-Control Commands
R&S
®
SMW-K144
169User Manual 1178.8013.02 ─ 06
Parameters:
<CarrierFreq> float
Range: 0.0 to 44E9
Increment: 1E3
*RST: 1E9
Example: See [:SOURce<hw>]:BB:NR5G:NODE:RFPHase:STATe
on page 168.
Manual operation: See "Frequency in GHz" on page 32
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TAPos
<DmrsTypeAPos>
Sets the position of the first DMRS symbol within the slot, if mapping type A is used.
Parameters:
<DmrsTypeAPos> integer
Range: 2 to 3
*RST: 2
Example: See Example "Configuring the carrier" on page 148.
Manual operation: See "DMRS Type A Position" on page 32
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SUL:STATe <CarrierSULState>
Defines if the carrier supports supplementary uplink (SUL) or not.
Parameters:
<CarrierSULState> 0 | 1 | OFF | ON
*RST: 0
Example: See Example "Configuring the carrier" on page 148.
Manual operation: See "SUL" on page 32
8.4 TxBW Commands
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:POINta............................................170
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:CONFlict?....................................... 170
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:RESolve..........................................170
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S120K:USE.....................................170
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S15K:USE.......................................170
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S60K:USE.......................................170
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S30K:USE.......................................170
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S120K:NRB?................................... 171
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S15K:NRB?.....................................171
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S60K:NRB?.....................................171
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S30K:NRB?.....................................171
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:TXBW:S120K:OFFSet................................ 171
TxBW Commands
To Next Page
Loading...