Rohde & Schwarz SMW-K144 - Page 174

Remote-Control Commands
R&S
®
SMW-K144
174User Manual 1178.8013.02 ─ 06
Parameters:
<RBOffset> integer
Range: 0 to 126
*RST: 10
Example: See Example "Configuring the SS/PBCH" on page 149.
Manual operation: See "RB Offset/RB Offset (15 kHz SCS)/RB Offset (60 kHz
SCS)" on page 37
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:SCOFfset
<SCOffset>
Sets the start subcarrier of the selected allocation within the resource block.
Parameters:
<SCOffset> integer
The value range depends on the selected RB offset ([:
SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:
RBOFfset).
Range: 0 to 11
*RST: 6
Example: See Example "Configuring the SS/PBCH" on page 149.
Manual operation: See "SC Offset/SC Offset (15 kHz SCS)/SC Offset (60 kHz
SCS)" on page 38
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:DFReq?
Queries the frequency offset between the center of the SS/PBCH block to the center of
the carrier.
Return values:
<PbchDeltaF> float
Range: -40E6 to 40E6
Increment: 1.0
*RST: 0.0
Example: See Example "Configuring the SS/PBCH" on page 149.
Usage: Query only
Manual operation: See "Delta f to Carrier (Centers)" on page 38
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:CASE <PbschCase>
Selects one of the SS/PBCH cases, as specified in TS 38.213.
Parameters:
<PbschCase> A | B | C | D | E
*RST: B
SS/PBCH Commands