Rohde & Schwarz SMW-K144 - Page 178

Remote-Control Commands
R&S
®
SMW-K144
178User Manual 1178.8013.02 ─ 06
Example: See Example "Configuring the SS/PBCH" on page 149.
Manual operation: See "SCS Common" on page 47
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:MIB:SCOFfset?
Queries the SS/PBCH subcarrier offset.
Return values:
<SSPbchSsbSCOff> integer
Range: 0 to 11
*RST: 0
Example: See Example "Configuring the SS/PBCH" on page 149.
Usage: Query only
Manual operation: See "SSPBCH Subcarrier Offset" on page 48
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:MIB:CSZero
<SSPbchCSZero>
Sets the common control resource set (CORESET) of the initial downlink BWP.
Parameters:
<SSPbchCSZero> integer
Range: 0 to 15
*RST: 0
Example: See Example "Configuring the SS/PBCH" on page 149.
Manual operation: See "CORESET Zero" on page 48
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:MIB:SSZero
<SSPbchSSZero>
Sets the common search space of the initial downlink BWP.
Parameters:
<SSPbchSSZero> integer
Range: 0 to 15
*RST: 0
Example: See Example "Configuring the SS/PBCH" on page 149.
Manual operation: See "Search Space Zero" on page 48
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:MIB:CBARred
<SSPbchCellBarre>
Cell barring is system information that indicates if UEs can camp on the particular cell
NBAR or not BARR.
SS/PBCH Commands