Rohde & Schwarz SMW-K144 - Page 181

Remote-Control Commands
R&S
®
SMW-K144
181User Manual 1178.8013.02 ─ 06
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:DUMRes:SLTFmt <SlotFmt>
Queries the used slot format.
Parameters:
<SlotFmt> integer
Range: 0 (in DL)/1 (in UL)
*RST: 0 (in DL)/1 (in UL)
Example: See Example "Filling in the frame with dummy REs"
on page 150.
Manual operation: See "Slot Format" on page 42
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:DUMRes:TPSTate <TrPrecState>
In uplink, enables using the optional DFT-S scheme.
Parameters:
<TrPrecState> 0 | 1 | OFF | ON
*RST: 0
Example:
SOURce1:BB:NR5G:LINK UP
SOURce1:BB:NR5G:NODE:CELL0:DUMRes:TPSTate 1
Manual operation: See "Transform Precoding" on page 42
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:DUMRes:DATA <DataSource>
Sets the data source for the dummy REs.
Parameters:
<DataSource> PN9 | PN11 | PN15 | PN16 | PN20 | PN21 | PN23 | PATTern |
DLISt | ZERO | ONE
*RST: PN9
Example: See Example "Filling in the frame with dummy REs"
on page 150.
Manual operation: See "Data Source" on page 42
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:DUMRes:DLISt <DSelect>
Selects an existing data list file from the default directory or from the specific directory.
Parameters:
<DSelect> string
Filename incl. file extension or complete file path
Example: See Example "Filling in the frame with dummy REs"
on page 150.
Manual operation: See "Data Source" on page 42
Dummy Resource Elements Commands