Rohde & Schwarz SMW-K144 - Page 215

Remote-Control Commands
R&S
®
SMW-K144
215User Manual 1178.8013.02 ─ 06
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:MAPType <MappingType>
Defines to which symbols of the PDSCH/PUSCH allocation the demodulation refer-
ence signals (DMRS) are mapped.
Parameters:
<MappingType> A | B
*RST: A
Example: See Example "Configuring the PDSCH incl. PTRS settings"
on page 153.
Manual operation: See "Mapping Type" on page 84
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:FMT <AllocPucchForma>
In uplink, selects the PUCCH format.
Parameters:
<AllocPucchForma> F0 | F1 | F2 | F3 | F4
*RST: F0
Example: See Example "Configuring the PUCCH settings" on page 161.
Manual operation: See "Format" on page 84
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:SLTFmt? <SlotFmt>
Queries the slot format.
Parameters:
<SlotFmt> integer
Range: 0 to 61
*RST: 0 (in DL)/1 (in UL)
Example: See Example "Configuring the configurable allocations in the
users and BWPs groups" on page 152.
Usage: Query only
Manual operation: See "Slot Format" on page 84
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:TPSTate <TrPrecState>
In UL, enables the optional DFT-s-OFDM instead of CP-OFDM per PUSCH.
Parameters:
<TrPrecState> 0 | 1 | OFF | ON
*RST: 0
Scheduling Commands