5G New Radio Configuration and Settings
R&S
®
SMW-K144
47User Manual 1178.8013.02 ─ 06
– Use the standard "File Manager" function to transfer external data lists to the
instrument.
See also:
●
Section "Modulation Data" in the R&S SMW user manual.
●
Section "File and Data Management" in the R&S SMW user manual.
●
Section "Data List Editor" in the R&S SMW user manual
Remote command:
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:CCODing:DATA
on page 176
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:CCODing:DLISt
on page 176
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:CCODing:PATTern
on page 177
MIB Content
If "Dummy Content for MIB > Off", comprises the setting to configure the MIB as
defined in the 3GPP specification.
SCS Common ← MIB Content
Selects the common SCS (subcarrier spacing).
Node Settings
To Next Page
Loading...