Rohde & Schwarz SMW-K144 - Pusch Settings;Pusch Uci Settings

5G New Radio Configuration and Settings
R&S
®
SMW-K144
71User Manual 1178.8013.02 ─ 06
└ Subcarrier Spacing......................................................................................... 74
└ Allocated Resource Blocks............................................................................. 74
└ Modulation...................................................................................................... 74
└ Payload Size...................................................................................................75
└ RB Offset........................................................................................................ 75
PUSCH settings............................................................................................................ 75
└ Config Type.....................................................................................................75
└ Additional Position Index.................................................................................76
└ Max Length..................................................................................................... 76
└ Scrambling ID 0/Scrambling ID 1....................................................................76
└ Transform Precoding...................................................................................... 76
└ Max Rank........................................................................................................77
└ TxConfig..........................................................................................................77
└ Codebook Subset........................................................................................... 77
└ Use PUSCH Scrambling ID............................................................................ 77
└ Data Scrambling ID.........................................................................................77
└ MCS Table...................................................................................................... 78
└ MCS Table Transform Precoding....................................................................78
PUSCH UCI settings.....................................................................................................78
└ State................................................................................................................78
└ Mode...............................................................................................................79
└ Scaling Alpha..................................................................................................79
└ I_CSI1_Offset,x, I_CSI2_Offset,x................................................................... 79
└ I_HARQ_Offset,x............................................................................................ 79
SRS...............................................................................................................................80
└ Number of SRS Antenna Ports.......................................................................80
User
Selects the user to be configured.
Remote command:
via suffix at USER<ch>
Cell
Selects/indicates to which carrier/cell the settings apply.
Remote command:
via suffix at CELL<ch>
BWP
Select the bandwidth parts (BWP) whose settings are displayed for configuration.
There are one or more BWPs, as set with the parameter "User/BWP Settings > UL
BWPs" > Number of DL/UL BWPs.
Remote command:
via suffix at BWP<dir0>
PUCCH settings
Access: "User/BWP Settings > UL BWP Config > PUCCH".
Users/BWPs Settings