Rohde & Schwarz SMW-K144 - Page 76

5G New Radio Configuration and Settings
R&S
®
SMW-K144
76User Manual 1178.8013.02 ─ 06
The configuration type is carried by the higher-layer parameter dmrs-Type.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTA:CTYPe on page 206
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTB:CTYPe on page 206
Additional Position Index ← PUSCH settings
Sets the parameter dmrs-AdditionalPosition that is required to select the posi-
tions of the DMRS symbols l
~
, as defined in TS 38.211.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTA:APINdex on page 207
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTB:APINdex on page 207
Max Length ← PUSCH settings
Sets the parameter maxLength and defines whether single- or double-symbol DMRS
is used.
If "Max Length = 1", only single-symbol DMRS is allowed.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTA:MLENgth on page 207
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTB:MLENgth on page 207
Scrambling ID 0/Scrambling ID 1 ← PUSCH settings
Sets the higher-layer parameters scramblingID0 and scramblingID1 (N
ID
0
,N
ID
1
).
The values are used to calculate the initialization sequence of the pseudo-random
sequence generator.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTA:SID0 on page 207
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTA:SID1 on page 207
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTB:SID0 on page 207
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:
PUSCh:DMTB:SID1 on page 207
Transform Precoding ← PUSCH settings
Sets the higher layer parameter transformPrecoder that defines which access
method is used, the optional DFT-s-OFDM or the CP-OFDM.
See also Chapter 3.3, "Multiple Access Schemes", on page 13.
"On"
Enables the precoding operation and thus enables the DFT-s-OFDM.
Users/BWPs Settings