Getting Started
R&S
®
SMW200A
85User Manual 1175.6632.02 ─ 16
A new thumbnail (minimized view) indicating the active diagram appears in the
"Taskbar".
4. Press the thumbnail graphic.
The graphic enlarges and the diagram is displayed in a normal size
The "Power Spectrum" displays two signals, both 3GPP FDD signals are frequency
shifted and the right one is also attenuated.
5. To retrieve more information, zoom in the spectrum and select "Show Marker" to
measure the distance between the two signals.
In principle, the zoom in function works like the two-finger pinching for magnifying
images on your cell phone.
6. In the "Power Spectrum" dialog, select "Configure" to return to the "Graphics Con-
figuration" dialog.
Close the "Graphics Configuration" dialog.
This action has no effect on the configured graphics but on the dialog itself.
The block diagram displays the current signal routing. It indicates that frequency
and power offsets are enabled and displays the acquisition points for the real-time
diagrams minimized in the "Taskbar".
Trying Out the Instrument
To Next Page
Loading...
