Rohde & Schwarz SMW200A - Page 1049

Remote Control Commands
R&S
®
SMW200A
1034User Manual 1175.6632.02 ─ 16
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension <Extension>
Determines the extension of the ASCII files for file import or export, or to query existing
files.
Parameters:
<Extension> TXT | CSV
*RST: TXT
Example: See Example "User correction data exchange" on page 1027 .
Manual operation: See "ASCII File Settings" on page 490
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect <Filename>
Selects the ASCII file to be imported or exported.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "User correction data exchange" on page 1027 .
Manual operation: See "Select Source/Select Destination" on page 491
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn <Column>
Selects the separator between the frequency and level column of the ASCII table.
Parameters:
<Column> TABulator | SEMicolon | COMMa | SPACe
*RST: COMMa
Example: See Example "User correction data exchange" on page 1027 .
Manual operation: See "ASCII File Settings" on page 490
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal <Decimal>
Sets the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Parameters:
<Decimal> DOT | COMMa
*RST: DOT
Example: See Example "User correction data exchange" on page 1027 .
Manual operation: See "ASCII File Settings" on page 490
SOURce Subsystem