Getting Started
R&S
®
SMW200A
90User Manual 1175.6632.02 ─ 16
As in the user interfaces of all digital standards, the "EUTRA/LTE" dialog is divided
into several tabs. The "General" tab comprises the primary settings of the standard,
the functions for storing and recalling settings and provides access to further func-
tions and dialogs, like the "Filter" settings. The "Trigger In", "Marker" and "Clock"
tabs comprise the settings related to the corresponding function.
The more complex the digital standard itself is, the more comprehensive the further
dialog and tab structure. The start dialog of each digital standard, however, follows
a repeating dialog structure that comprises the tabs "General", "Trigger In",
"Marker" and "Clock". (See also Chapter 2.5.3.4, "Additional Display Characteris-
tics", on page 111).
Tip: To display the dialog in its maximal height, press the RESIZE WINDOW key
on the front panel.
3. In the "EUTRA/LTE General" tab, select "Test Models".
The test models is a function for quick selection and settings adjustment according
to one of the various EUTRA test models (E-TM).
A standard "File Select" function enables you to select form files with predefined
settings.
Tip: On the front panel, press the HELP key to retrieve detailed information on the
current settings and on the contents of the predefined files.
4. Navigate to a file, for example to the E-TM1_1__10MHz (an E-TM1.1 test model
with 10 MHz channel bandwidth) and confirm with "Select".
The dialog closes automatically and the user interface confirms the name of the
selected file.
5. In the "EUTRA/LTE > General" tab, select "State > On".
Trying Out the Instrument
To Next Page
Loading...
