Rohde & Schwarz SMW200A - Page 1068

Remote Control Commands
R&S
®
SMW200A
1053User Manual 1175.6632.02 ─ 16
Return values:
<Catalog> "<filename1>,<filename2>,..."
Returns a string of file names separated by commas.
Usage: Query only
Manual operation: See "Save/Recall" on page 188
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:STORe <Filename>
Stores the current settings into the selected file; the file extension (*.iqout) is
assigned automatically.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
Manual operation: See "Save/Recall" on page 188
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension *.iqout.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
Manual operation: See "Save/Recall" on page 188
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:DELete <Filename>
Deletes the selected file from the default or specified directory. Deleted are files with
the file extension *.iqout.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
Manual operation: See "Save/Recall" on page 188
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE <Type>
Sets the type of the analog signal.
SOURce Subsystem