Getting Started
R&S
®
SMW200A
92User Manual 1175.6632.02 ─ 16
Select "RF A > On".
The instrument generates an EUTRA/LTE test signal with the selected channel
bandwidth, frequency, and level.
With these first steps, you have gained an impression of the provided functionality.
For a comprehensive description of the full range of capabilities, refer to the user man-
ual "EUTRA/LTE Digital Standard for R&S SMW200A".
2.3.9 Using the System Configuration Capabilities for MIMO Setups
The R&S SMW supports versatile MIMO configurations and provides comfortable func-
tions to simplify the definition and signal routing for MIMO test setups and configuration
involving several instruments. For complex routing scenarios, the "System Configura-
tion" functionality is the start and central configuration point. Within one dialog, you can
configure complex configurations with up to 8 Tx or Rx antennas or up to two stand-
alone 2x2 MIMO systems, e.g. 8x2 MIMO or LTE-A carrier aggregation with 2x2
MIMO.
This example does not cover the whole range of the "System Configuration" capabili-
ties but delivers an insight into the topic. The example shows how to use coupled
baseband sources and select a suitable fading and baseband configuration to generate
an EUTRA/LTE signal in 2x2 MIMO configuration.
Trying Out the Instrument
To Next Page
Loading...
