Remote Control Commands
R&S
®
SMW200A
1121User Manual 1175.6632.02 ─ 16
Example: See Example "Querying the error queue" on page 1117
Usage: Query only
:SYSTem:ERRor:HISTory:CLEar
Clears the error history.
Example: See Example "Querying the error queue" on page 1117
Usage: Event
Manual operation: See "Clear History" on page 1176
:SYSTem:ERRor:STATic?
Returns a list of all errors existing at the time when the query is started. This list corre-
sponds to the display on the info page under manual control.
Return values:
<StaticErrors> string
Example: See Example "Querying the error queue" on page 1117
Usage: Query only
:SYSTem:ULOCk <Mode>
Locks or unlocks the user interface of the instrument.
Parameters:
<Mode> ENABled | DONLy | DISabled | TOFF | VNConly
ENABled
Unlocks the display, the touchscreen and all controls for the
manual operation.
DONLy
Locks the touchscreen and controls for the rmanual operation of
the instrument. The display shows the current settings.
VNConly
Locks the touchscreen and controls for the rmanual operation,
and enables remote operation over VNC. The display shows the
current settings.
TOFF
Locks the touchscreen for the rmanual operation of the instru-
ment. The display shows the current settings.
DISabled
Locks the display, the touchscreen and all controls for the man-
ual operation.
*RST:
n.a. (factory preset: ENABled)
SYSTem Subsystem
To Next Page
Loading...
