Rohde & Schwarz SMW200A - 2.5 Instrument Control; Generation of a WLAN 802.11 Ad Signal with 1.76 Ghz Bandwidth; Possible Ways to Operate the Instrument

Getting Started
R&S
®
SMW200A
106User Manual 1175.6632.02 ─ 16
2.4.2.6 Generation of a WLAN 802.11ad Signal with 1.76 GHz Bandwidth
The block diagram in this example depicts the generation of a WLAN 802.11ad test
signal with 1.76 GHz bandwidth. The instrument uses one internal wideband baseband
generator with 2 GHz bandwidth and one RF output.
2.5 Instrument Control
This chapter provides an overview on how to work with the R&S SMW.
It covers the following topics:
● Possible Ways to Operate the Instrument.............................................................106
● Means of Manual Interaction.................................................................................107
● Understanding the Display Information.................................................................108
● Accessing the Functionality...................................................................................113
● Entering Data........................................................................................................ 114
● Getting Information and Help................................................................................ 116
● Remote Control.....................................................................................................121
● Remote Operation over VNC................................................................................ 121
2.5.1 Possible Ways to Operate the Instrument
There are three ways to operate the R&S SMW:
●
Manual operation:
Use the touchscreen, hard keys and rotary knob, or an optional mouse and/or key-
board. The principles of manual operation are explained in Chapter 2.5, "Instru-
ment Control", on page 106.
●
Remote control:
Instrument Control