Getting Started
R&S
®
SMW200A
114User Manual 1175.6632.02 ─ 16
To minimize a dialog box
► Tap the "Minimize" icon in the upper right corner.
To close a dialog box
► Tap the "Close" icon in the upper right corner.
Or:
Press the ESC key on the front panel.
To select an option in a dialog box
► Tap the required option.
To select an option in a list
If many options are available - for example, for the trigger mode - the options are provi-
ded in a list. The current selection is shown on the list button.
► Tap in the list, scroll in the list and then tap the required option.
Or:
Use the rotary knob
Or:
Use ON/OFF TOGGLE key to select the succeeding option
Or:
Use the front panel keys:
a) Press the LEFT/RIGHT arrow keys to navigate to the list button.
b) Press the ENTER key to open the list.
c) Press the UP/DOWN keys to navigate to the required option in the list.
d) Press the ENTER key to select the marked option.
2.5.5 Entering Data
Some parameters have their own key on the front panel.
For data input in dialog boxes, the instrument provides an on-screen keypad for
numeric values, and an on-screen keyboard for alphanumeric settings. Thus, you can
always set the parameters via the touchscreen, the front panel, or an external key-
board.
Correcting an entry
1. Using the arrow keys, move the cursor to the right of the entry you want to delete.
2. Press the BACKSPACE key.
3. Deletes the entry to the left of the cursor.
4. Enter your correction.
Instrument Control
To Next Page
Loading...
