Signal Routing and System Configuration
R&S
®
SMW200A
168User Manual 1175.6632.02 ─ 16
Example: Baseband and fading signal routing in standard mode
The Figure 3-6 shows an example of the signal flow for the following signal routing set-
tings:
●
"Baseband A > Signal Routing > route to path A and B"
●
"Baseband B > Signal Routing > route to path A and B"
●
"BB Input A > Signal Routing > route to path A and B"
●
"BB Input B > Signal Routing > route to path B"
●
"Fading > System Configuration > Mode = Standard > System Configuration > A to
A and B, B to A and B"
Figure 3-6: Example: Baseband and fading signal routing in standard mode
Signal Routing Settings
To Next Page
Loading...
