Configuring the Internal Baseband Source
R&S
®
SMW200A
362User Manual 1175.6632.02 ─ 16
"RMS"
The individual carriers are leveled based on their RMS power and the
configured "Carrier Gain".
Example:
A multi carrier signal is composed from two waveform files.
First carrier "Gain" = 0 dB
Second carrier "Gain" = -3 dB
In the resulting multi carrier signal, the RMS power of the second car-
rier signal will be 3 dB lower than the RMS power of the first carrier
signal.
Generating Multi-Carrier Signals
To Next Page
Loading...
