Rohde & Schwarz SMW200A - How to Generate an Amplitude Modulated Signal

Configuring the Signal in the RF Domain
R&S
®
SMW200A
518User Manual 1175.6632.02 ─ 16
Figure 7-25: Pulse Graph - single pulse
1 = Pulse Period
2 = Pulse Delay
3 = Pulse Width
4 = Pulse Zoom Position
Figure 7-26: Pulse Graph - double pulse
1 = Pulse Period
2 = Pulse Width
3 = Double Pulse Delay
4 = Double Pulse Width
5 = Pulse Zoom Position
7.7.4 How to Generate an Amplitude Modulated Signal
The following examples use the internal LF generator.
Analog Modulations