Monitoring Signal Characteristics
R&S
®
SMW200A
585User Manual 1175.6632.02 ─ 16
4. For the reverse operation, select "Zoom out".
To enable markers to readout exact measured data
In an enlarged diagram:
1. Select "Show Marker".
Two markers appear, one over the other.
2. To position the markers, select and shift them.
"M2-M1" indicates the distance of marker 1 and marker 2 on the x-axis (left value)
and on the y-axis (right value).
Figure 8-16: Power spectrum with GSM and WCDMA signal and markers
3. To hide the markers, select "Hide Marker".
To observe the effect of fading
We assume that a WCDMA-3GPP signal is generated and you observe the power
spectrum diagram. The display confirms the WCDMA-3GPP spectrum with a maximum
level at around -30 dBm.
Displaying Baseband Signal Characteristics in Real-Time
To Next Page
Loading...
