Rohde & Schwarz SMW200A - Page 646

File and Data Management
R&S
®
SMW200A
631User Manual 1175.6632.02 ─ 16
Recall.......................................................................................................................... 632
Recall Immediate x......................................................................................................632
File Manager............................................................................................................... 632
Operation Mode
Accesses the settings for storing ("Save") and loading ("Recall") of the instrument set-
tings, or for exporting created SCPI files ("SCPI-Export").
See Chapter 10.6, "Exporting Remote Command Lists", on page 638.
Directory, File List and Filename
Note:
You access this generic standard function each time you perform one of the following:
●
Save or load (settings) files
●
Define a folder in that these files are saved
●
Navigate through the file system.
The dialog name changes depending on the context. The provided functions are self-
explanatory and similar.
Use the settings for example as follows:
●
To navigate through the file system, use the directory tree.
●
To create a file, load and save files, use the dedicated functions "New", "Select",
Save, and Recent files.
●
To access the general data list editor, use the "Edit button
(see also Chapter 7.6.7, "List Editor", on page 486).
●
To perform standard file management functions, like create directories, move,
copy, delete files and/or directories, use the standard "File Manager" function (see
Chapter 10.8, "Using the File Manager", on page 639).
Remote command:
To list all files in a directory:
:MMEMory:CDIRectory on page 781
:MMEMory:CATalog? on page 780
Refer to the description of firmware options for the syntax of the corresponding SCPI
command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog? on page 1031
To list files with user data:
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 913
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 913
Recent files
Displays the files last used.
Save
Saves the current instrument settings or the settings belonging to a digital standard
under the defined filename.
Remote command:
:MMEMory:STORe:STATe on page 787
Refer to the descriptions of the firmware options for the correct syntax of the corre-
sponding SCPI commands:
Saving and Recalling Instrument Settings