File and Data Management
R&S
®
SMW200A
647User Manual 1175.6632.02 ─ 16
3. On the remote PC, start the Windows Explorer.
4. In the address field, enter ftp://<"IP Address" of the Instrument>, e.g.
ftp://10.113.10.91.
Tip: The R&S SMW indicates IP address on the screen.
A log-on dialog opens and requests a password.
The default user name and password is instrument.
Tip:
Default password
The FTP and SAMBA file access use the user "instrument" with default password
"instrument".
We recommend that you change this password in the "Setup > Security > Pass-
word Management > Change User Password" dialog before connecting the instru-
ment to the network.
See Chapter 11.5.4, "Password Management", on page 694.
5. Enter the password to access the /var/user/share directory.
You can access the files in the /var/user directory, perform standard function
like creating directory, or storing files.
6. Open the /var/user/share directory and create a directory, e.g. test ftp.
7. Select "SAVE/RCL".
Open the /var/user directory.
The dialog displays the /var/user/test ftp directory.
How to Transfer Files from and to the Instrument
To Next Page
Loading...
