Getting Started
R&S
®
SMW200A
54User Manual 1175.6632.02 ─ 16
Figure 2-2: Touchscreen elements
1 = Status bar (frequency and level display)
2 = Block diagram
3 = Taskbar/softkey bar
A touchscreen is a screen that is touch-sensitive. It reacts in a specified way when a
particular element on the screen is tapped by a finger. Any user interface element that
can be clicked by a mouse pointer can also be tapped on the screen to trigger the
same behavior.
Using the touchscreen, the following tasks (among others) can be performed by the tap
of your finger:
●
Changing a setting
●
Selecting new settings
●
Scrolling through the list of parameters
●
Saving or recalling settings
●
Routing the signal flow
●
Opening and closing dialogs
See also Chapter 2.3, "Trying Out the Instrument", on page 66.
To imitate a right-click by mouse using the touchscreen, for example to open a context-
sensitive menu for a specific item, touch and hold the screen for about 1 second.
Instrument Tour
To Next Page
Loading...
