Network Operation and Remote Control
R&S
®
SMW200A
735User Manual 1175.6632.02 ─ 16
3. In the menu bar, select "Choose VISA Implementation > Rohde & Schwarz Visa"
and confirm with "OK".
4. In the menu bar, select "Find Resource" to search for the instrument in the LAN.
5. Select "VXI-11" and "Find Resources".
R&S VISA scans the network for connected instruments and lists all detected
instruments in the "Resource" list.
Note: The search may take some time, particularly in large networks.
6. Select the required instrument and confirm with "Select".
The "Find and select resource" dialog closes and R&S VISA indicates the IP
address in the "Resource" field of the main application window.
7. As an alternative to the IP address, you can assign an alias name to the
R&S SMW:
How to Set Up a Remote Control Connection
To Next Page
Loading...
