Network Operation and Remote Control
R&S
®
SMW200A
748User Manual 1175.6632.02 ─ 16
2. Select "Export".
The "SCPI Recording Export" dialog contains all functions required for export of
command lists to a file. It enables you to select the source code format, assign an
individual filename and display the file content.
Format
Selects the source code format for the command list.
"Plain SCPI"
Uses SCPI syntax.
"Predefined Code Generator"
Accesses the predefined templates for common source code genera-
tors that convert the recorded settings in the programming languages
MATLAB or NICVI.
"User Code Generator"
Provides the ability to convert a script by a user-specific code genera-
tor.
Select Code Template
Opens the standard "File Select" dialog and lists the predefined or user-defined code
templates.
See Chapter 10.5.1, "File Select Settings", on page 635.
File
Opens the standard file select dialog "Select Output File", see Chapter 10.5.1, "File
Select Settings", on page 635.
Export
Executes data export.
Reload
Loads the SCPI list.
File content
Displays the content of the script in the selected format and code template.
Automating Tasks with Remote Command Scripts
To Next Page
Loading...
