Remote Control Commands
R&S
®
SMW200A
830User Manual 1175.6632.02 ─ 16
The Figure 13-2 shows the extent of the particular solution.
Figure 13-2: Extent and impact of the provided solutions
Your R&S SMW as a controller of external instruments
The Figure 13-3 shows a simplified version of the test setup on Figure 3-19. The figure
shows a configuration example of two R&S SGS, directly controlled by an R&S SMW.
The figure illustrates the principle and does not show all connections.
Figure 13-3: Remote control of external RF instruments via the R&S
SMW
In this setup, a controller does not need to access the external instruments directly.
Instead, the R&S SMW acts as a controller to these instruments.
We assume that:
●
You control the R&S SMW from a remote controller
SCONfiguration Subsystem