Remote Control Commands
R&S
®
SMW200A
854User Manual 1175.6632.02 ─ 16
Setting parameters:
<Filename> string
Only the file name is required
Example: See Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Setting only
Manual operation: See "Initialization Sequence" on page 159
:SCONfiguration:EXTernal:CODer<ch>:REMote:INITialization:FILE?
:SCONfiguration:EXTernal:FADer<ch>:REMote:INITialization:FILE?
:SCONfiguration:EXTernal:BBMM<ch>:REMote:INITialization:FILE?
:SCONfiguration:EXTernal:IQOutput<ch>:REMote:INITialization:FILE?
Queries the currently selected initialization file.
Return values:
<Filename> string
filename with file extension (*.iec)
Example: see Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Query only
Manual operation: See "Initialization Sequence" on page 159
:SCONfiguration:EXTernal:REMote:PURGe
Removes unused instruments from the pool of external instruments.
Example:
see Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Event
Manual operation: See "Purge/Clean" on page 156
:SCONfiguration:EXTernal:REMote:CLEan
Removes all instruments from the pool of external instruments.
Example:
see Example "Connecting and configuring external instrument
(advanced configuration)" on page 826
Usage: Event
Manual operation: See "Purge/Clean" on page 156
:SCONfiguration:EXTernal:CODer<ch>:REMote:SEND <SendScpiCommand>
:SCONfiguration:EXTernal:FADer<ch>:REMote:SEND <SendScpiCommand>
SCONfiguration Subsystem
To Next Page
Loading...
