Rohde & Schwarz SMW200A - Source:bb:DM Subsystem

Remote Control Commands
R&S
®
SMW200A
890User Manual 1175.6632.02 ─ 16
Return values:
<Rms> float
Range: -145 to 30
Increment: 0.01
*RST: 0
Default unit: dBfs
Example:
BB:POW:RMS
queries the rms level of the baseband signal.
Usage: Query only
13.18.4.2 SOURce:BB:DM Subsystem
This section list the commands of the SOURce:BB:DM subsystem. The commands are
divided into sections, where the last one describes how to use lists for digital modula-
tion in remote control, and all other sections describe the configuration of the digital
modulation.
Suffixes in the keywords ENTity<ch> and SOURce<hw>
You can address multiple entities configurations by using the SCPI commands starting
with the keyword SOURce or the alias commands starting with the keyword ENTity.
Table 13-4: Value ranges of the suffixes ENTity<ch> and SOURce<hw> in advanced configuration
with multiple entities
SCPI Syntax
ENTity<ch> SOURce<hw>
SOURce<hw>:BB:...
- 1 to 4
ENTity<ch>:SOURce<hw>:BB:...
1 to 4 1 to 4
See also Chapter 13.3, "SCPI Command Aliases for Advanced Mode with Multiple
Entities", on page 767.
Required options
See Chapter 4.6.1, "Required Options", on page 264
The commands are grouped in the following sections:
● Programming Examples........................................................................................891
● General Commands..............................................................................................893
● Save/Recall Settings.............................................................................................897
● Filter Settings........................................................................................................ 898
● Modulation and Coding Settings........................................................................... 900
● Power Ramping.....................................................................................................903
● Trigger Settings.....................................................................................................905
● Marker Settings.....................................................................................................910
● Clock Settings....................................................................................................... 912
● Handling List Files.................................................................................................913
SOURce Subsystem